Faith Themed Cup Wraps
Faith Themed Cup Wraps
Material: UV DTF Sticker (Ultraviolet Direct To Film Printing)
This listing is for one (1) cup wrap if you’d like more than one simply add more quantity.
These are designed for 16oz Libbey cups, glass or plastic.
These wraps are waterproof and designed to stick to glass, metal, wood, acrylic and more! They work best on hard surfaces.
Not made for fabric.
Size: Width 9.45”- 9.75” Height 4.33-4.75”
How to apply:
1. Clean the surface of your product thoroughly. Apply only to smooth surfaces. You can use alcohol or soap and water just make sure it’s dry after.
2. Before you remove the backing place your wrap on a flat surface and use firm pressure to squeegee the whole design moving the squeegee back and forth several times. If you don’t have a squeegee yet you can use a card and/or apply pressure with your hands.
3. Carefully & slowly remove the sticker from its backing, especially if the design includes fine lines and small parts.
4. Apply the sticker to your product carefully, as once it's in place, it cannot be removed.
There are many techniques you can use to do this. I’d recommend watching a few videos online if it’s your first time.
5. Apply firm pressure to the already placed sticker by running the squeegee over the entire design area many times until there are no bubbles. This will ensure that your design will fully stick. This step is very important!
6. Once your design is applied fully, Slowly remove the clear top part of the sticker, especially around smaller parts of the design.
If any part of the design isn’t sticking, press it back down and use the squeegee again to apply pressure.
And that’s it your cup is now ready to use!
Disclaimer: Hand wash ONLY! Do not microwave or use them in dishwashers.
We are not responsible for misuse or damage during the application process.
Please Note: Not all 16 oz Libbey cups are the same size some can varies by a few millimeters. Small adjustments may be necessary.
Our wraps are sized for the most common 16oz Libbey cups.